Mopar 82215277AB User Manual

K6862801
3-29-18
1
Ram Démarrage à distance Ram Arranque remoto
REMOTE START
RAM
G
F
I
H
www.mopar.com
A
B
D
E
J
L
K
CUSTOMER INFORMATION
CARD
IMPORTANT: After installing this kit, all the non-remote start FOBIKs which came equipped with this vehicle will still
be functional and can be used as intended except to perform remote start function. This applies to both Admin and
KeySense type FOBIKs. DO NOT DISCARD ORIGINAL FOBIKs AFTER INSTALLATION IS COMPLETE.
RETURN ALL FOBIKs TO CUSTOMER.
Prior to installing this kit, inform the customer that ALL ORIGINAL FOBIKs (non-remote start) and new FOBIKs (with
remote start) can be used to operate the vehicle and that only the new FOBIKs (which have the remote start button)
can be used to remote start the vehicle. If the customer does not bring ALL FOBIKs to the Dealership at the time of
install of this kit, the customer will need to SYCN only the FOBIKs that were not present at the time of install of this
kit. The SYNC procedure can be found on the yellow color CUSTOMER INFORMATION CARD in this kit. Give the
instructions to the customer or leave on the front passenger seat and inform them of this notice.
DO NOT DISCARD THE CUSTOMER INFORMATION CARD!
C
2X
20X
7X
2X
Carte d'information du client
Tarjeta de información del cliente

Mopar 82215277AB Specifications

General

Product Type	Remote Starter
Part Number	82215277AB
Brand	Mopar
Type	OEM Remote Starter
Features	Keyless entry
Category	Accessories

Summary

Remote Start Kit Pre-Installation and Information

Customer Information Card Handling

Guidelines for managing the customer information card and key pre-installation notes.

Vehicle Compatibility Requirements

Critical CAUTION: Details required factory options for successful XBM remote start installation.

Installation Safety Precautions

WARNING: Essential safety measures, particularly concerning airbags, during the installation process.

Vehicle Installation Procedures

Battery Disconnection and Panel Removal

Procedure for safely disconnecting the vehicle battery and removing initial interior panels.

Wiring Harness Routing and Connections

Instructions for correctly routing the wiring harness and making all required vehicle connections.

Interior Component Installation

Steps for installing the remote start components, focusing on interior trim and panels.

Final Wiring and Reassembly

Completing the installation by checking wiring, trimming ties, and reassembling vehicle parts.

System Programming and Testing

RF-HUB and FOBIK Synchronization

Guide for programming the RF-HUB module and re-syncing original vehicle FOBIKs.

New FOBIK Programming

Procedure for programming the new remote start FOBIKs included with the kit.

Restore Vehicle Configuration

Steps to restore the vehicle's system configuration using diagnostic tools post-installation.

System Testing and Verification

Final checks to test remote start functionality and clear any diagnostic trouble codes (DTCs).