5. Brakes
Right lever
– front brake
Left lever – rear brake
The pull path of the brake is 10-20 mm. The vehicle usually has a front brake and a
rear drum brake. Adjustment can be made by turning the brake cable adjustment
screw clockwise.
Caution: Stretch distance means the distance between the position when the vehicle
is travelling at normal speed and begins to brake and the moment when the vehicle
stops. Pay attention to the sensitivity of the vehicle.
Before you start driving, check:
● that there are no leaks
● that there are no leaks or scratches on the discharge pipe
● rubbing of the brake pads
To Next Page
Loading...
Need help?
General