● abrasion of the brake pads or the distance between the normal position of the front
brake and the handlebar grip is 10-20 mm
6. Brake fluid
The vehicle was filled with special brake fluid from the factory. The scooter user
should fill or replace the fluid with the recommended fluid (DOT4). Never replace
brake fluid with or mix it with other fluids to avoid damaging the brake system. If the
brake fluid is not of good enough quality, air can get into the brake system and cause
damage.
Caution: brake fluid is a highly aggressive agent. This can cause damage and paint
deterioration in certain parts of the vehicle. If fluid is found on any part of the
scooter, it should be cleaned immediately.
Safety precautions: if liquid gets into eyes or on skin, rinse quickly with plenty of
water!
7. Tires
Tire pressure that is too low can cause vehicle instability. Check the pressure and
remember to do regular maintenance. It is suggested to change tires when the tread
depth is less than 2 mm.
To Next Page
Loading...
Need help?
General