METHODS OF ENVIRONMENTAL PROTECTION AND FUEL ECONOMY
In order to maintain the proper functioning of your vehicle, to reduce the release of
harmful substances into the environment and to achieve the most economical
driving possible, it is important that your vehicle is properly maintained..
Clean or replace the air filter
The air filter is used to filter out debris entering the cylinder. If there is too much dirt
or too much moisture, it blocks the air, which in turn causes the fuel-air mixture to
be too dense, incomplete combustion, the engine to lack power, excessive fuel
consumption and release of harmful substances into the environment. The fuel filter
must therefore be unblocked. A blocked filter should be replaced to avoid improper
operation.
Clean, adjust and replace spark plugs
Remove dirt from the spark plug and adjust the clearance. If it is functioning
improperly, then it should be replaced. Otherwise, its resistance is high and the spark
is low, resulting in the fuel not burning completely. This results in excessive fuel
consumption and release of harmful substances into the environment.
To Next Page
Loading...
Need help?
General