Morgana AutoCreaser Pro 33 - Page 39

AutoCreaser Pro 33
SYSTEM
Page 39
REVISION HISTORY
Mod No.Rev. Mod Description Date Mod By
3 ECO2809 02/01/13 BAL
Note at the bottom of Page 20 added, reference the position of switch
SW1 when fitting a new Main Control PCB.
Page 29 re-written, reference Optical Sensors - Cleaning and Setting.
4 ECO2811 23/01/13 BAL
Pages 27 & 38 Changes:- T15A Fuse was F15A.
Mod No.Rev. Mod Description Date Mod By
ECO28225 03/04/13 BAL
Pages21to24updatedtocovertheintroductionofanewITXmotherboard.
And to make reference to referring to TB2822 when changing ITX mother board,
PICprocessorboard,orUSBflashdrive.