Need help?Do you have a question about the Morgana AutoCreaser Pro 33A and is the answer not in the manual?
Visual safety indicators and precautions for machine operation.
Details the compressor, system, and emergency stop switches on the control panel.
Explains the operation and purpose of the system and compressor switches.
Steps to set up the machine for automatic sheet feeding.
Instructions for using the cover crease function.
Guide for setting up the optional cross perforating kit.
Explanation of the main status display elements and navigation.
Procedure to calibrate the touchscreen display for accurate input.
Setting side lay, back stop, and air distribution for paper feeding.
Setting roller tilt and drive wheel positions for accuracy.
Setting up, storing, and retrieving jobs.
Procedures for clearing jams and manual sheet feeding.
Instructions for assembling the standard stacker unit.
Guide for assembling the optional stacker unit.
Details available spares kits for perforating blades and anvils.
Procedure for correctly positioning the perforating blades and anvils.
Procedure to adjust the pressure of the creasing blade.
Step-by-step guide for replacing the creasing blade set.
Instructions for installing the cross perforating kit.
Solutions for common problems like crease squareness and paper feed.
Interpretation of error messages and corresponding solutions.
Procedure for cleaning and maintaining lead edge sensors.
Guidelines for weekly and technician maintenance.
Identifies fuse locations and their amp/voltage ratings.
General| Brand | Morgana |
|---|---|
| Model | AutoCreaser Pro 33A |
| Category | Industrial Equipment |
| Language | English |
To Next Page
