Morgana AutoCreaser Pro 33 - Page 4

Page 4
CREASING
INDEX
Introduction
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Section 7
Section 8
Section 9
Section 10
Section 11
………………………………………………………………………….
…… Covers………….….……………………………………………….
…….Vacuum Drum
……Removal of Butterfly Valve Assembly.......................................
……Main Creaser Mechanism .......................................................
…….Removal /Replacement Stepper Drive Belt / Pulleys …………
…….Infeed Roller Removal/Replacement……………………………
…….Drive Hub - Replace Rubber Torsion Bush (shock absorber)
…….Drive Link Refurbishment…….…………………………………...
…….Electrics………..…The PRO Control System………………......
…..Optical Sensors - Cleaning and Setting…………………………..
…...Trouble Shooting…………………………………………………
i Introduction
Fasteners
Identification
iv New Machine Preparation
…………………………………………………….
Suction Drum and Belt Removal/Replacement
Removal of Unit
Removal of Unit
Removal/Refitting PCBs
Diagnostics
Setting the Measurement System (Metric / Inch)
Setting the Language (English, French, German)
Autocreaser Pro 33 Wiring Diagram
Autocreaser Pro 33 Control PCB Connection Diagram
Calibration of Creasing Position
Trouble Shooting
Fuse Positions and Ratings
ii
iii