mori seiki MSD-518 User Manual

Applicable Model
NC LATHES
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
MM-CENL-H2EN
Applicable NC Unit
MSC-500 MSX-511 MSC-801
MSG-500 MSX-511III MSC-802
MSX-500 MSC-515 MSC-803
MSX-500III MSD-515 MSG-803
MSC-501 MSC-516 MSX-803
MSD-501 MSD-516 MSX-803III
MSD-501II MSD-516II MSG-805
MSG-501 MSC-518 MSX-805
MSX-501 MSD-518 MSX-805III
MSX-501III MSD-518II MSG-806
MSG-502 MSC-521 SEICOS Σ21L
MSX-502 MSC-700
MSX-502III MSC-701
MAINTENANCE MANUAL
The manuals for maintenance are comprised of the following
three manuals including this manual:
MAINTENANCE MANUAL, MAINTENANCE INFORMATION,
and INSTALLATION MANUAL.

mori seiki MSD-518 Specifications

General

Brand	mori seiki
Model	MSD-518
Category	Lathe
Language	English

Summary

Chapter A Daily Inspection

1. The Importance of Daily Inspection

Explains the significance of daily checks for maintaining machine accuracy and performance over time.

2. Notes on Inspections and Maintenance

Provides essential safety and hygiene considerations for inspections and maintenance tasks.

3. Lubricating and Hydraulic Oil

Details guidelines for handling, storing, and replenishing lubricating and hydraulic oils.

6. Cleaning Machining Chamber/Setup Station

Emphasizes daily cleaning of the machining chamber and setup station to maintain accuracy.

9. Precautions When Using Chip Conveyor

Outlines safety precautions and operational guidelines for using the chip conveyor.

10. Opening/Closing the Electrical Cabinet Door

10.3 Main Power Switch

Explains how to lock the main power switch for maintenance and safety procedures.

11. Preparation for Machine Operation After Prolonged Idle Period

Chapter B Regular Inspection

1. Importance of Inspections

2. Checks Prior to Maintenance

Lists critical checks and safety precautions to be performed before starting any maintenance work.

3. Precautions to Be Observed by Technicians

Provides essential safety guidelines for technicians performing work on the machine.

10. Replacing the Machining Chamber Observation Window

14. Changing the Battery

Covers changing batteries for memory backup and absolute position sensing.

15. Adjusting the Setting Pressure

Covers adjusting hydraulic unit main pressure and air pressure for proper machine operation.

How to Order Machine Parts

Ordering Example for Limit Switch