mori seiki MSD-501 User Manual

Applicable Model
NC LATHES
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
MM-CENL-H2EN
Applicable NC Unit
MSC-500 MSX-511 MSC-801
MSG-500 MSX-511III MSC-802
MSX-500 MSC-515 MSC-803
MSX-500III MSD-515 MSG-803
MSC-501 MSC-516 MSX-803
MSD-501 MSD-516 MSX-803III
MSD-501II MSD-516II MSG-805
MSG-501 MSC-518 MSX-805
MSX-501 MSD-518 MSX-805III
MSX-501III MSD-518II MSG-806
MSG-502 MSC-521 SEICOS Σ21L
MSX-502 MSC-700
MSX-502III MSC-701
MAINTENANCE MANUAL
The manuals for maintenance are comprised of the following
three manuals including this manual:
MAINTENANCE MANUAL, MAINTENANCE INFORMATION,
and INSTALLATION MANUAL.

mori seiki MSD-501 Specifications

General

Brand	mori seiki
Model	MSD-501
Category	Lathe
Language	English

Summary

DAILY INSPECTION

THE IMPORTANCE OF DAILY INSPECTION

Explains why daily checks are crucial for machine accuracy.

NOTES ON INSPECTIONS AND MAINTENANCE

LUBRICATING AND HYDRAULIC OIL

Details specifications, storage, and handling of oils.

SUPPLYING OIL IN DAILY MAINTENANCE

Covers replenishing lubricating oil and coolant tanks.

PRECAUTIONS WHEN USING CHIP CONVEYOR

OPENING/CLOSING THE ELECTRICAL CABINET DOOR

Step-by-step guide for safely opening and closing electrical cabinets.

PREPARATION FOR MACHINE OPERATION AFTER PROLONGED IDLE PERIOD

Procedures for preparing the machine after extended downtime.

REGULAR INSPECTION

IMPORTANCE OF INSPECTIONS

Highlights the role of regular inspections in maintaining accuracy.

CHECKS PRIOR TO MAINTENANCE

Safety checks and precautions before performing maintenance.

PRECAUTIONS TO BE OBSERVED BY TECHNICIANS

Safety guidelines and warnings for maintenance personnel.

CLEANING THE COOLANT TANK

CLEANING THE LUBRICATING OIL TANK

INSPECTION AND REPLACEMENT OF SLIDE SEALS

TIMING BELT REPLACEMENT

Guidance on replacing timing belts for axis operation.

CHANGING FLUID OF HYDRAULIC TANK

CHANGING THE BATTERY

Covers replacing memory backup and position sensing batteries.

ADJUSTING THE SETTING PRESSURE

OUTLINE OF SYSTEMS

CHUCK AND CYLINDER SYSTEM

HOW TO ORDER THE MACHINE PARTS