mori seiki MSG-803 - User Manual

Applicable Model
NC LATHES
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
MM-CENL-H2EN
Applicable NC Unit
MSC-500 MSX-511 MSC-801
MSG-500 MSX-511III MSC-802
MSX-500 MSC-515 MSC-803
MSX-500III MSD-515 MSG-803
MSC-501 MSC-516 MSX-803
MSD-501 MSD-516 MSX-803III
MSD-501II MSD-516II MSG-805
MSG-501 MSC-518 MSX-805
MSX-501 MSD-518 MSX-805III
MSX-501III MSD-518II MSG-806
MSG-502 MSC-521 SEICOS Σ21L
MSX-502 MSC-700
MSX-502III MSC-701
MAINTENANCE MANUAL
The manuals for maintenance are comprised of the following
three manuals including this manual:
MAINTENANCE MANUAL, MAINTENANCE INFORMATION,
and INSTALLATION MANUAL.

mori seiki MSG-803 Specifications

General

X-Axis Travel	445 mm
Z-Axis Travel	1540 mm
Turret Stations	12
Spindle Motor	30 kW
Spindle Motor Power	30 kW

Summary

MAINTENANCE MANUAL

Applicable Model

Lists the applicable machine models.

Applicable NC Unit

Lists the applicable NC units.

SIGNAL WORD DEFINITION

Symbols related with warning

Defines DANGER, WARNING, CAUTION symbols.

FOREWORD

Protection for machine operators

CHAPTER A DAILY INSPECTION

THE IMPORTANCE OF DAILY INSPECTION

Explains the significance of daily checks.

NOTES ON INSPECTIONS AND MAINTENANCE

LUBRICATING AND HYDRAULIC OIL

SUPPLYING OIL IN DAILY MAINTENANCE

CLEANING MACHINING CHAMBER;SETUP STATION

PRECAUTIONS WHEN USING CHIP CONVEYOR

OPENING;CLOSING THE ELECTRICAL CABINET DOOR

Main Power Switch

Procedures related to the main power switch.

CHAPTER B REGULAR INSPECTION

IMPORTANCE OF INSPECTIONS

Explains the importance of regular inspections.

CHECKS PRIOR TO MAINTENANCE

Essential checks before performing maintenance.

PRECAUTIONS TO BE OBSERVED BY TECHNICIANS

Safety guidelines for technicians.

CLEANING THE COOLANT TANK

CLEANING THE LUBRICATING OIL TANK

When the Lubricant Pressure does not Rise

Troubleshooting for lubricant pressure issues.

REPLACING THE MACHINING CHAMBER OBSERVATION WINDOW

TIMING BELT REPLACEMENT

CHANGING FLUID OF HYDRAULIC TANK

CHANGING THE BATTERY

General information on changing batteries.

ADJUSTING THE SETTING PRESSURE

Procedures for adjusting hydraulic and air pressure.

CHAPTER C OUTLINE OF SYSTEMS

CHUCK AND CYLINDER SYSTEM

Safety Practices when Mounting;Removing a Chuck

Safety guidelines for chuck operations.

Gripping Force

Setting the Chucking Pressure

HOW TO ORDER THE MACHINE PARTS