mori seiki MSX-501 User Manual

Applicable Model
NC LATHES
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
MM-CENL-H2EN
Applicable NC Unit
MSC-500 MSX-511 MSC-801
MSG-500 MSX-511III MSC-802
MSX-500 MSC-515 MSC-803
MSX-500III MSD-515 MSG-803
MSC-501 MSC-516 MSX-803
MSD-501 MSD-516 MSX-803III
MSD-501II MSD-516II MSG-805
MSG-501 MSC-518 MSX-805
MSX-501 MSD-518 MSX-805III
MSX-501III MSD-518II MSG-806
MSG-502 MSC-521 SEICOS Σ21L
MSX-502 MSC-700
MSX-502III MSC-701
MAINTENANCE MANUAL
The manuals for maintenance are comprised of the following
three manuals including this manual:
MAINTENANCE MANUAL, MAINTENANCE INFORMATION,
and INSTALLATION MANUAL.

mori seiki MSX-501 Specifications

General

Category	Lathe
Spindle Bore Diameter	65 mm
Spindle Speed Range	40 - 4000 rpm
Spindle Motor Power	11 kW
Type	Turning Center
Control Type	Fanuc

Summary

Signal Word Definition

DANGER

Definition and implications of the DANGER warning level.

WARNING

Definition and implications of the WARNING warning level.

CAUTION

Definition and implications of the CAUTION warning level.

Daily Inspection

The Importance of Daily Inspection

Explains the significance of daily checks for machine accuracy.

Notes on Inspections and Maintenance

Provides safety and general guidelines for inspection and maintenance procedures.

Opening/Closing the Electrical Cabinet Door

Preparation for Machine Operation After Prolonged Idle Period

Regular Inspection

Checks Prior to Maintenance

Essential checks and safety procedures to follow before commencing maintenance.

Precautions to be Observed by Technicians

Critical safety guidelines and warnings for maintenance technicians.

Inspection and Replacement of Slide Seals

Changing the Battery

Adjusting the Setting Pressure