mori seiki MSX-805 User Manual

Applicable Model
NC LATHES
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
MM-CENL-H2EN
Applicable NC Unit
MSC-500 MSX-511 MSC-801
MSG-500 MSX-511III MSC-802
MSX-500 MSC-515 MSC-803
MSX-500III MSD-515 MSG-803
MSC-501 MSC-516 MSX-803
MSD-501 MSD-516 MSX-803III
MSD-501II MSD-516II MSG-805
MSG-501 MSC-518 MSX-805
MSX-501 MSD-518 MSX-805III
MSX-501III MSD-518II MSG-806
MSG-502 MSC-521 SEICOS Σ21L
MSX-502 MSC-700
MSX-502III MSC-701
MAINTENANCE MANUAL
The manuals for maintenance are comprised of the following
three manuals including this manual:
MAINTENANCE MANUAL, MAINTENANCE INFORMATION,
and INSTALLATION MANUAL.

mori seiki MSX-805 Specifications

General

Brand	mori seiki
Model	MSX-805
Category	Lathe
Language	English

Summary

Signal Word Definition

Symbols Related to Warning

Explains DANGER, WARNING, and CAUTION symbols for hazard levels.

Chapter A Daily Inspection

Importance of Daily Inspection

Explains the critical role of daily checks for machine accuracy.

Notes on Inspections and Maintenance

Work in General Safety

Safety precautions for general work on the machine.

Work Inside the Machine Safety

Detailed safety procedures when working inside the machine.

Supplying Oil and Coolant

Chuck Maintenance

Procedure for greasing chuck master jaws and inspection.

Cleaning Machining Chamber Components

Cleaning Drain Oil Receiver for Lubricating Oil

Cleaning Radiator

Chip Conveyor Precautions and Cleaning

Safety precautions and cleaning procedures for the chip conveyor.

Electrical Cabinet Door Operations

Procedures for opening and closing the electrical cabinet door.

Main Power Switch Safety

Information and procedures for locking the main power switch.

Machine Operation After Prolonged Idle Period

Procedures for preparing the machine after extended downtime.

Chapter B Regular Inspection

Importance of Inspections

Emphasizes regular inspections for machine accuracy and longevity.

Checks Prior to Maintenance

Essential safety checks before commencing maintenance work.

Precautions for Technicians

Safety guidelines and warnings for technical personnel.

Electrical Cabinet Cleaning

Coolant and Oil Tank Cleaning

Procedures for cleaning the coolant and lubricating oil tanks.

Lubricant Pressure Troubleshooting and Relief Valve Maintenance

Troubleshooting low lubricant pressure and relief valve procedures.

Hydraulic System Maintenance

Fan Cleaning

Machining Chamber Window Replacement

Slide Seal Inspection and Replacement

Timing Belt Replacement

Battery Replacement Procedures

CNC Memory Back-up Battery Replacement

Servo Absolute Position Sensing Battery Replacement

Setting Pressure Adjustments

Chapter C Outline of Systems

Chuck and Cylinder System

Safety Practices for Chuck Operations

Critical safety precautions for chuck mounting and removal.

Gripping Force and Related Parameters

Maximum Allowable Chuck Speed

Setting the Chucking Pressure