mori seiki MSX-850III User Manual

USERS' MANUAL
MANUAL DEL USUARIO
Applicable Model
Modelo afectado
NL1500
NL2000
NL2500
NL3000
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
UM-NL-G0ESEN
Antes de iniciar la utilización, mantenimiento o programación, lea
detenidamente los manuales facilitados por Mori Seiki, el fabricante del CN y
los fabricantes de los equipos para poder asegurarse de que comprende
íntegramente la información contenida en los mismos.
Guarde los manuales con sumo cuidado de modo que no se pierdan.
Applicable NC Unit
Aplicable a Las Unidades CN
MSX-850
MSX-850III

mori seiki MSX-850III Specifications

General

Brand	mori seiki
Model	MSX-850III
Category	Lathe
Language	English

Summary

USERS' MANUAL

CHAPTER 1 BASIC OVERVIEW

4 TURNING ON/OFF POWER

Explains the procedures for turning the machine's power on and off.

5 ZERO RETURN OPERATION

Details the process of returning the machine's axes to their zero points.

7 DOOR INTERLOCK FUNCTION

7-1 Door Interlock for Standard Specifications

7-2 Releasing Door Interlock Function

7-3 Door Interlock Function (CE Specification)

8 TOOL MOUNTING PROCEDURE

9 PREPARING THE MANUAL IN-MACHINE TOOL PRESETTER

9-1 Installing and Removing the Manual In-Machine Tool Presetter Arm (Detachable Type, Spindle 2 Side)

9-2 Interlocks for Using the Manual In-Machine Tool Presetter

10 TOOL GEOMETRY OFFSET VALUE MEASUREMENT/ENTRY WITH MANUAL IN-MACHINE TOOL PRESETTER

10-1 Measurement Procedure with the Manual In-Machine Tool Presetter

Describes the step-by-step process for measuring tool geometry offset using the presetter.

12 SETTING WORKPIECE ZERO POINT (Z0)

13 CHUCKING

13-1 Clamping/Unclamping Chuck

Explains procedures related to clamping and unclamping the chuck.

13-2 Adjusting the Chucking Pressure

Provides instructions on how to adjust the chucking pressure.

15 TAILSTOCK

15-1 Preparing the Tailstock (Common to Digital and Programmable Tailstocks)

15-2 How to Use the Digital Tailstock

Guides on how to use the digital tailstock for various operations.

15-3 How to Use the Programmable Tailstock (NL3000/2000, 3000/3000)

Explains how to use the programmable tailstock.

16 ADJUSTING THE WORK UNLOADER (BUILT-IN TYPE)

17 NC PROGRAMMING OVERVIEW

17-1 Terms for NC Programming

Explains basic terms used in NC programming.

17-2 Axis Control and Direction

Explains axis definitions and movement directions.