Need help?Do you have a question about the MORLEY-IAS ZXa and is the answer not in the manual?
General| Enclosure Rating | IP30 |
|---|---|
| Compatibility | Compatible with Morley-IAS protocol devices |
| Power Supply | 24V DC |
| Input Voltage | 230V AC |
| Relative Humidity | 95% non-condensing |
Highlights safety procedures to prevent injury and equipment damage during installation and operation.
Covers the programming and management of Level 2 and Level 3 passwords for system access.
Details how to access the specific commissioning functions using the Level 3 password.
Details the process of configuring signaling loops, including auto-learn and zone assignment.
Explains how to configure sounder and relay outputs for the system.
Guides on setting up panel network addresses and configurations for networked systems.
Covers the configuration of signaling loops, including auto-learn, zones, and devices.
Details the Auto Learn process for peripheral bus devices.
Details configuring a delayed mode for outputs during specific times, with stage timers.
Guides the user through enabling and setting parameters for the delayed mode.
Guides the user through enabling and setting parameters for sensitivity mode.
Guides the user through enabling and setting parameters for verification mode.
Covers network options like panel address and shared zone settings.
Details setting the unique network address for each panel in a system.
To Next Page
