Need help?Do you have a question about the MORLEY-IAS ZXe and is the answer not in the manual?
Highlights safety procedures and operational precautions for installers, emphasizing adherence to regulations.
Steps to access the panel's commissioning functions, requiring Level 3 password entry.
Initial steps including clearing configuration memory and checking factory default settings.
Process for configuring loop devices, performing auto-learn, assigning zones, and entering descriptions.
Steps for configuring peripheral devices, including auto-learn and device assignment.
Programming sounder patterns and relay operations based on zonal requirements.
Setting up delayed, sensitivity, or verification modes based on time of day.
Setting up panel addresses, slave panels, and network communication parameters.
Final checks including passwords, program integrity, and locking the memory.
Procedure to enter the main configuration menu, requiring the memory lock to be open.
Options for configuring signaling loops, including zones, devices, auto-learn, and calibration.
Facility to automatically detect and learn installed devices on a signaling loop.
Process for dividing the system into zones and assigning devices to specific zones.
Accessing detailed information about devices on a loop and their configuration.
Modifying device settings such as sensor text, zone, and event assignments.
Procedure for entering or modifying the descriptive text for device locations.
Adjusting pre-alarm and alarm levels for detectors, with day/night sensitivity options.
Facility to automatically learn devices connected to the peripheral bus.
Programming sounder operation relative to zones in alarm using predefined patterns.
Detailed steps for configuring delayed sounder and output activation based on time.
Steps to place the panel into its active operating state after configuration.
General| Brand | MORLEY-IAS |
|---|---|
| Model | ZXe |
| Category | Control Panel |
| Language | English |
To Next Page
