Need help?Do you have a question about the MORLEY M35 and is the answer not in the manual?
Details the warranty that the product manufactured by Morley Equipment Company shall be free from defects in material and workmanship.
Outlines Morley Equipment Company's agreement to repair or furnish faulty components within 30 days of purchase.
Specifies products not covered by the warranty, including those subjected to misuse, neglect, or improper installation.
Provides detailed specifications for the M35 Air-Cooled model, including motor, drive unit, spindle, and dimensions.
Lists optional accessories available for the M35 saw, such as different sized bladeguards, and a night light.
Presents a chart detailing recommended lubrication and service checks for various components of the saw.
Instructions for connecting the water supply to the saw and ensuring lines are clear of obstructions.
Details on how to operate the Raise/Lower lever to control the saw's vertical movement via a hydraulic pump.
Explanation of the Forward/Reverse lever for controlling the saw's movement speed and neutral braking.
Step-by-step guide for fitting blades of various sizes (12" to 24") onto the saw's spindle.
Instruction to refer to the Engine Manual for the correct procedure for starting the saw's engine.
Guidance on how to position and maneuver the saw using handle bars and its drive motors for leverage.
Guidance on layout, alignment, water usage, and step-cutting for effective and cost-efficient cutting operations.
Recommendations for thoroughly washing the saw after use, including precautions for gas and electrical systems.
Instructions for storing the saw, emphasizing lubrication after cleaning for preservation.
Procedures for checking spindle and rear axle alignment to ensure straight travel and parallel blade movement.
Information on how to order replacement parts from Morley Equipment Company, requiring model and serial numbers.
Provides contact details for Morley Equipment Company for any questions regarding operation or servicing.
Lists parts for the spindleshaft assembly, including bearings, collars, nuts, keys, and drive belts.
Details components of the front axle assembly, such as weldment, wheels, collars, bearings, and pins.
Lists parts for the hydraulic raise and lower system, including pump motor, cylinder, and solenoid valves.
Lists parts for the hydrostatic drive system, including hydraulic pump, drive motor, wheels, filters, and levers.
Details components of the pointer assembly, such as pointer wheels, bushings, cable pointer, and weldment.
Lists parts related to the mainframe and console, including guards, handlebar, fuel tank, and cap.
Lists components of the engine, including the Kohler engine, air filter, hoses, cables, and oil filter.
Lists parts for the bladeguard assembly, including water distribution block, hoses, valve, and various sized guards.
Explains the function and location of the needle valve used to adjust the raising speed of the saw.
To Next Page
General