Morpheus Gargoyle - Page 41

Morpheus Technologies Owner’s Manual
http://www.BaseRigs.com/
Page 41 Morpheus Technologies
Figure 2
Figure 2: Route the top of the toggle through the cat’s eye and stow the top of the
toggle through the elastic keeper provided on the riser. The white riser loop is not utilized
when a slider is being used. Just lay it to the side.
Figure 3
Figure 3: S-fold and stow the excess control lone to the inside of the riser and around to
the elastic keeper, located on the front side of the rear riser. Check proper routing. Be
certain that the control line leading to the canopy is routed to the outside. Be certain
that the Velcro on the toggle mates with the Velcro on the riser.