Morpheus Technologies Owner’s Manual
http://www.BaseRigs.com/
Page 40 Morpheus Technologies
Section10.4: Setting your brakes: With slider
Figure B
Figure B: Take time to ensure that you have the proper set-up for jumping with a slider.
The control lines MUST pass through the riser guide rings and the appropriate slider
grommets. The top of the toggle must never pass through the guide ring.
Figure 1a and 1b
Figure 1: Pull the toggle down so that the appropriate cat’s eye is below the guide ring.
When jumping slider up, this is typically the brake loop closest to the toggle.
To Next Page
Loading...