3. Remove the inner casing from
the clear acrylic base and add
salt or peppercorns.
4. Replace the inner battery casing on
the base, ensuring that this sits properly
by aligning the slot on the battery casing
with the notch on the acrylic base
(just above the two arrows).
Using the Salt & Pepper Mills
1. Open the top cover by turning it
anticlockwise and pulling it up.
2. Insert 6xAAA batteries (not included)
into the inner casing. Ensure the
batteries are inserted correctly
(+/-) as indicated.
02
Electronic
Salt & Pepper Mill Set
To Next Page
Loading...
