4
Using Your Milk Frother
Place the milk frother on to a dry, level
surface. Remove the Lid (1) by lifting
upwards.
If frothing is required, ensure the Frothing
Whisk (14) is securely attached to the
Stirring Arm
(13).
If only stirring is required, ensure the
Frothing Whisk is removed.
When not in use, the Frothing Whisk can be
pushed onto the Frothing Whisk Storage
(2)
on the underside of the Lid (1).
Place the Stirring Arm
(13) into the Jug
(5). Use the Magnet on the inner side (11)
to locate the Stirring Arm.
Pour milk into the Jug (5). When using the
Frothing Whisk (14), do not exceed the
Max Level (Frothing) (10) on the inside of
the Jug.
Replace the Lid
(1) and select your
preferred frothing programme, see details
on page 5.
Before First Use
R
emove all packaging and wash the inside of your milk frother using warm soapy water and a soft
damp cloth. DO NOT use a scouring pad or abrasive material as this will remove the non-stick
c
oating. DO NOT immerse the frother in water. Rinse and dry thoroughly before use.
To Next Page
Loading...
