Morphy Richards IB41510 User Manual

Voyager travel iron
The After Sales Division, Morphy Richards Ltd, Mexborough,
South Yorkshire, England, S64 8AJ Helpline (office hours)
:UK (local rate) 08450 777700, Republic of Ireland 1800 409119
MaintenanceMaintenance
MaintenanceMaintenance
Maintenance
Jet Cleaning
Your iron has a built in cleaning
system designed to keep the water
valve, steam chamber and steam
vents clear of lint and loose mineral
deposits. The ‘jet clean’ should be
operated after each period of ironing.
To operate, ensure that there is
little water in the tank, place the iron
on its heel and turn the temperature
control dial to the maximum setting.
Wait for the temperature indicator
light to go out, then unplug the iron
and hold it 6’’ (150mm) above the
sink in the ironing position. Push in
the steam control about 10 times in
succession. After this cleaning
operation, empty out any remaining
water.
To clean a coated soleplate
In the unlikely event of any man-
made fibre fusing to the soleplate, set
the iron at the 3 dot position and pass it
over a clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause damage to
the coating.
To clean the exterior
Allow the iron to cool and wipe over
with a damp cloth and mild detergent,
then dry with a dry cloth.
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and
design. The Company, therefore, reserves the right to change the specification
of its models at any time.
Morphy Richards Limited, Mexborough,
South Yorkshire, England, S64 8AJ
441/3752/21 Rev 1
Includes World Wide Travel Adaptor
World Wide Travel Adaptor
The world wide travel adaptor converts UK plugs to foreign sockets in seconds.
The adaptor consists of both a continental adaptor plug for travel within Europe
and a trans-continental adaptor plug for use in North/South America, Japan, Far
East and Australia.
Attention
It is not suitable for use in all countries.

Morphy Richards IB41510 Specifications

General

Brand	Morphy Richards
Model	IB41510
Category	Iron
Language	English

Summary

Maintenance

Jet Cleaning

System to clear water valve, steam chamber, and steam vents of deposits. Operation after ironing.

To Clean a Coated Soleplate

Remove fused fibers by passing over a clean piece of cotton to draw off the deposit.

To Clean the Exterior

Wipe the iron with a damp cloth and mild detergent, then dry with a dry cloth.

Includes World Wide Travel Adaptor

World Wide Travel Adaptor

Converts UK plugs to foreign sockets for international travel within Europe and beyond.

Two Year Guarantee

Exclusions

Lists conditions and circumstances under which the guarantee is not valid.

Operating the Iron

Shot of Steam

Provides a boost of extra steam for ironing out stubborn creases in heavy materials.

Vertical Steam

Creates vertical steam for removing creases from hanging clothes, curtains, or wall hangings.

Emptying and Storing

Electrical Requirements

Components of Your Iron

Instructions for Use

Temperature Guide

Matches heat settings on the control dial to international textile care labelling codes.

Filling

Details how to safely fill the water tank with water using the provided beaker.

Temperature Control

Features of Your Iron

Temperature Indicator Light

Indicates when the iron is warming up and maintaining the selected heat setting.

Dry Ironing

Steam Control

Important Safeguards

Special Instructions