Assembly
Push the elbow-shaped end of the suction
hose into the housing until it clicks into place.
Te lescopic tube È
Attach the tube to the handle.
To adjust the length, press the release button
as indicated and pull or push the tube to the
desired length.
Floor nozzle Ë
This nozzle is suitable for general purpose
cleaning on a wide variety of floor coverings.
Operation
The cable should always be fully withdrawn
before plugging into an electrical socket.
Switching on
Ensure that the electronic suction power
control is set to minimum (slider to the left).
Press foot pedal to start the motor.
4
È
To Next Page
Loading...
