Cleaning the motor
protection filter
The motor protection filter is accessible from
the dust compartment only when the airbox has
been removed first.
WARNING: NEVER USE THE APPLIANCE
WITHOUT THE MOTOR PROTECTION FILTER
INSTALLED, OTHERWISE DAMAGE TO THE
MOTOR MAY OCCUR WHICH WOULD NOT BE
COVERED BY THE GUARANTEE.
1 Open the flap on the filter cassette.
2 Take out the micro hygiene filter.
3 Wash in warm water and leave to air dry. DO
NOT USE DETERGENTS.
4 Replace the dry filter and close the filter
cassette.
5 Insert the airbox and close the dust
compartment cover.
Recommendation
The micro hygiene filter should be cleaned
when you have emptied the airbox 5 times.
Important
Ensure the filter is completely dry before
reinserting into the machine.
Replacement filters can be purchased from
our Replacement Parts Helpline Number
0870 167 6635.
9
To Next Page
Loading...
