3
Do not operate this machine before it has been
assembled correctly and you have read and
understood these instructions.
These instructions are intended as a general guide
and do not supersede national or local codes in any
way. Contact local Authorities for clarity of laws
relating to operation of this appliance.
Keep the instructions in a safe place for future use.
Contents
Symbols on the machine 3
Symbols in this Owner’s Manual 3
Proper Use 3
Safety Instructions 3
List of Parts 5
Assembly 6
Functional Description 6
Operation 7
Maintenance 8
Technical Data 8
Troubleshooting 9
Symbols on the Machine
1. 2. 3. 4.
5. 6. 7. 8.
9. 10 11. 12.
1. Read instruction manual
2. Take particular care and attention
3. Objects may be thrown out at high speed
4. Keep bystanders and pets away from danger area
5. Danger - Rotating blades. Keep hands and feet out of openings while
machine is running
6. Danger - Rotating blades. Keep hands and feet out of openings while
machine is running
7. Wear eye and ear protection
8. Wear protective gloves
9. Do not expose to rain or moisture
10. Switch off the motor and unplug before servicing, cleaning,
maintenance or repairing
11. Wait until all the machine parts stop completely
12. Do not use the machine as a step
Symbols in this Owner’s Manual
Threatened hazard or hazardous situation.
Not observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling.
Not observing this instruction can lead to faults
in the machine.
User information. This information helps you to
use all the functions correctly.
Proper Use
For safety reasons, the Electric Shredder is not to be used by
children, young people under 16 years of age, or any other
persons who are not acquainted with these directions for use.
Specific safety information Please read this safety
information and the directions for use carefully and be
sure to follow the instructions to the letter.
Safety Instructions
• The shredder must be assembled correctly before use.
Warning!
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Warning!
This appliance must be earthed!
Use only three core extension cables with the earth wire
connected.
For your safety you must use an isolating transformer
or an R.C.D. device between the power supply and the
extension cable.
• Only use extension cables that are approved for outdoor use
and check that they are in good condition before use.
• Protect the cables from damage by heavy mechanical use,
sharp edges, contact with moving parts and corrosive liquids,
• etc.
• Warning! Do not use an extension cable that shows signs of
damage. Fit a complete new cable - do not undertake any
permanent or temporary repairs. Have the cable replaced by a
qualified technician.
• Use only IEC60245 (H07RN-F) extension cable for outdoor use
with splash-proofed connector. Its cross section must be at
least 1.5 mm
2
for cable lengths up to 25 m, and 2.5 mm
2
for
cable lengths over 25 m.
To Next Page
Loading...