morse 15 - User Manual

IMPORTANT:
1. Review the Material Safety Data Sheet(s) for the material(s) in the
can(s) and take all necessary precautions. Safety shoes, work
gloves, hard hat and other personal protective devices are recom-
mended.
2. Please read all instructions thoroughly before attempting to operate
your new MORSE Can Tipper.
3. The model 15 is designed to pour a 5-gallon can weighing up to 75
Lb. DO NOT exceed these ratings. Exceeding these ratings or
handling cans other than those mentioned above is unsafe and
could result in equipment damage or excessive wear.
4. When loading, unloading, operating, or maintaining your MORSE
Can Tipper, always use care and good judgment. Maintain secure
footing and a firm hold. Keep hands and loose clothing away from all
moving parts. Read operating instructions and review the pictures in
the sales brochure before operation.
Receiving Procedures
Every Morse product is inspected prior to shipping. However, damage
may be incurred during transit.
• Check for visible damage. If you choose to accept damaged freight,
always sign noting the damage on the BILL OF LADING.
• Document the damage and have the truck driver sign. We recommend
keeping a digital camera at your receiving dock for this purpose.
• Open packages expeditiously to check the condition of the goods. There
is only a 24 hour window to notify the carrier of any concealed damage.
• IMMEDIATELY REPORT ALL DAMAGE TO THE SHIPPING
COMPANY! Then you may contact Morse for assistance with your
freight claim.
• Morse Manufacturing will not be held responsible for any damaged
freight that is not signed for as damaged.
Delivery to non-business addresses without a loading dock result in
additional freight charges. Residential delivery fees, inside delivery fees,
re-delivery charges, and lift gate services will be added by the truck line,
and are non-negotiable.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for TWO YEARS when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts carry
the warranties of their manufacturers.
MORSE MFG. CO., INC. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518
Phone: 315-437-8475 • Fax: 315-437-1029 • Email: service@MORSEmfgco.com • Website: www.MORSEmfgco.com
COPYRIGHT 2006 MORSE MFG. CO., INC. Form PL 15 (0506) (Updated 10/2006) Page 1
MODEL 15
CAN TIPPER
The Specialist In Drum Handling Equipment
Contents
Page
Receiving Procedures. . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Parts Lists and Diagrams. . . . . . . . . . . . . . . . . 3
Operator’s Manual
for Morse Can Tipper Model 15
Manufactured 05/2006 to _______
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return freight
must be prepaid.
In all instances, liability is limited to the purchase price paid or to repairing
or replacing the product. Customer assumes liability for any
modifications, unauthorized repairs or parts substitution.
Safety Information
While Morse Manufacturing Co. equipment is engineered for safety and
efficiency, a high degree of responsibility must be placed upon the machine
operator to follow safe practices, based primarily on common sense,
upon which true safety depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions as
with similar machinery where carelessness in operating or maintenance
is hazardous to personnel. Carefully read the safety precautions below
and throughout this manual.

Summary

Receiving Procedures and Warranty Information

Receiving Procedures

Inspect all Morse products for damage incurred during transit. Document and report any damage immediately.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects for two years when used properly.

Safety Information and Guidelines

Important Safety Precautions

Key safety warnings include avoiding modifications, loose clothing, and exceeding the 75 Lb weight limit.

Assembly and Maintenance

Assembly Instructions

Step-by-step guide to unpack and assemble the Can Tipper unit using provided parts and hardware.

Maintenance Recommendations

Periodically inspect moving parts, framework, and contact areas for signs of wear or loosening.

Parts List and Diagram

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Morse Model 15 Can Tipper is a specialized piece of drum handling equipment designed for safely and efficiently pouring the contents of 5-gallon cans. It is specifically engineered to handle cans weighing up to 75 Lb., making it suitable for various industrial and commercial applications where controlled pouring of liquids from such containers is required. The device's primary function is to provide a stable and controlled mechanism for tilting and emptying 5-gallon cans, minimizing spills and ensuring operator safety.

Function Description:

The Can Tipper operates by securely holding a 5-gallon can within a can holder assembly. This assembly is designed to pivot, allowing the operator to tilt the can and pour its contents with precision. The device features a base assembly that provides stability during operation, preventing accidental tipping or movement. A center brace further enhances the structural integrity of the unit. The can holder includes a catch mechanism to secure the can in place, ensuring it remains stable during the pouring process. The design emphasizes ease of use and safety, allowing for controlled pouring without the need for manual lifting and tilting of heavy cans, which can lead to strain or injury.

Important Technical Specifications:

• Model: 15
• Capacity: Designed for 5-gallon cans
• Weight Limit: Up to 75 Lb. (maximum can weight)
• Dimensions (approximate, based on diagram):
  • Overall Height: Approximately 20 1/2 inches
  • Base Width: Approximately 14 inches
  • Base Depth: Approximately 12 5/8 inches
  • Can Holder Diameter: Approximately 12 1/4 inches
• Materials: Constructed with durable materials suitable for industrial use, ensuring longevity and resistance to wear. (Specific material types are not detailed but implied by "drum handling equipment" standards).
• Components:
  • Can Holder Assembly (Part #1687-P)
  • Catch Assembly with Screw (Part #4283-P)
  • Plastic Handle Caps (Part #4234-P)
  • Thumb Screw (Part #1686-P)
  • Lock Nuts, 1/4-20 Nylon (Part #1518-P)
  • Panhead Screws, 1/4-20 x 5/8 (Part #1517-P)
  • Base Assembly, 15 Series (Part #4277-P)
  • Center Brace, 15 (Part #4281-P)
• Manufacture Date: Manufactured from 05/2006 onwards.

Usage Features:

• Ease of Assembly: The device requires some assembly upon receipt. The instructions detail a straightforward process involving spreading the base assembly, fastening the center brace, and attaching the can holder. Screws and nuts are used for secure connections.
• Secure Can Holding: The can holder assembly, along with its catch mechanism and thumb screw, ensures that the 5-gallon can is firmly secured before and during the pouring operation, preventing accidental dislodgement.
• Controlled Pouring: The pivoting design of the can holder allows for precise control over the tilt angle, enabling operators to pour liquids at a desired rate and minimize splashing or spills.
• Ergonomic Design: By eliminating the need to manually lift and tilt heavy cans, the Can Tipper reduces the risk of back injuries and muscle strain, promoting a safer working environment.
• Portability: While not explicitly stated as portable, the compact design suggests it can be easily moved within a workspace, though specific weight is not provided.
• Safety Precautions: The manual emphasizes several critical safety points:
  • Weight Capacity: Strict adherence to the 75 Lb. weight limit is crucial to prevent equipment damage and ensure safety.
  • Material Safety Data Sheets (MSDS): Operators are advised to review MSDS for the materials being handled and take necessary precautions.
  • Personal Protective Equipment (PPE): Safety shoes, work gloves, and hard hats are recommended.
  • No Modifications: Unauthorized modifications are strictly prohibited as they can void the warranty and lead to injury or damage.
  • Loose Clothing: Operators must avoid wearing loose-fitting clothing that could get caught in moving parts.
  • Secure Footing: Maintaining secure footing and a firm hold during operation is essential.
  • Good Judgment: Always use care and good judgment when operating or maintaining the Can Tipper.

Maintenance Features:

• Periodic Inspection: Regular inspection of all moving parts, framework, and contact areas is recommended to check for signs of wear, fatigue, or loosening. This proactive approach helps identify potential issues before they lead to equipment failure or safety hazards.
• Lubrication: The manual specifically advises applying a few drops of oil to the pivot bolts during assembly and reapplying periodically to minimize wear and ensure smooth operation of the pivoting mechanism.
• Damage Reporting: Upon receiving the product, a thorough inspection for visible and concealed damage is critical. Any damage must be immediately reported to the shipping company and documented, ideally with a digital camera, and noted on the Bill of Lading. Morse Manufacturing will not be responsible for damaged freight not signed for as damaged.
• Warranty: The equipment comes with a Limited 2-Year Warranty covering defects in workmanship or materials when used properly within its rated capacity. This warranty does not cover normal wear, accident, or abuse. Motors and other purchased parts are covered by their respective manufacturers' warranties. For warranty claims, customers must contact their Morse Dealer to obtain a return authorization number, and return freight must be prepaid.
• Repair and Modification Policy: Liability is limited to the purchase price or repair/replacement of the product. Customers assume liability for any modifications, unauthorized repairs, or parts substitution, reinforcing the importance of adhering to the manufacturer's design and specifications.

In summary, the Morse Model 15 Can Tipper is a robust and safety-conscious device designed to streamline the process of pouring from 5-gallon cans, offering a reliable solution for controlled dispensing in various industrial settings. Its emphasis on safety, clear operational guidelines, and straightforward maintenance procedures make it a practical tool for handling heavy liquids.

morse 15 Specifications

General

Brand	morse
Model	15
Category	Industrial Equipment
Language	English