EasyManua.ls Logo

Morso 1126 - Page 22

Morso 1126
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
DK ENG
We recommend that the stove be installed at least 10-15 cm from masonry in order to allow
heat to circulate and to facilitate the cleaning of the inside and outside of the stove. A layer
of wallpaper on a brick wall is normally regarded as non-ammable material.
The oor
If the stove is installed on a ammable oor, national and local regulations must be observed
with regard to the size of the non-ammable underlying surface that must cover the oor be-
neath the stove.
The underlying surface must naturally be able to bear the weight of the stove and, if ap-
plicable, the steel chimney.
Distance to furniture
We recommend that the stove be installed 900 mm from furniture, but consideration should
also be given to whether furniture, etc., will dry out as a result of its proximity to the stove.
The distance to ammable material in front of the stove is 900 mm.
A wood-burning stove gets hot when it is red. Caution must therefore be observed, par-
ticularly with regard to children touching the stove.
The stove has a removable handle in stainless steel ensuring that a handle is always cold.
When the handle has been removed, the stove gets more childproof.
1.5 The chimney
If local regulations permit, the stove may be connected to a chimney already serving another
replace (such as an oil-burning stove or another wood-burning stove). Attention should be
paid to any requirements concerning the location of ue pipes if two or more replaces are
connected to the same chimney.
The wood-burning stove must never be connected to a chimney to which a gas-burning stove
is already connected.
Minimum distances from ammable material:
Type of stove Behind the stove (A)
To the sides of the
stove (B)
To furniture
Morsø 1126
uninsulated ue
pipe
300 mm 400 mm 900 mm
Morsø 1126
insulated ue pipe
150 mm 400 mm 900 mm
B
A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1126
RSV
09.12.2009
A4
Dimension Skecth
Date of print: 09-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1126-110 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 1 of 4
A
A
45°
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1126
RSV
09.12.2009
A4
Dimension Skecth
Date of print: 09-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1126-110 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 2 of 4

Related product manuals