EasyManua.ls Logo

MOSKO MOTO Backcountry 35L User Manual

MOSKO MOTO Backcountry 35L
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Backcountry 35L Pannier Kit Installation
1. Remove the wedge from the frame as shown in image below (bag not pictured for
clarity).
Tools Required:
- 4mm Hex Key
(included)
Question and Answer IconNeed help?

Do you have a question about the MOSKO MOTO Backcountry 35L and is the answer not in the manual?

MOSKO MOTO Backcountry 35L Specifications

General IconGeneral
Weight3.5 lbs
Capacity35 liters
Mounting SystemMolle and strap system
Color OptionsBlack
CompatibilityMost motorcycles and adventure bikes
FeaturesWaterproof

Summary

Backcountry 35L Pannier Kit Installation

Tools Required

List of essential tools for installation, including a 4mm hex key.

Wedge Removal from Frame

Instruction to detach the wedge component from the motorcycle frame as illustrated.

Mounting Wedge to Rack

Securing the wedge to the pannier rack using provided blue pucks, screws, and washers.

Bracket Parallelism Check

Ensure mounting brackets are parallel to the wedge for even pressure distribution and to prevent damage.

Mounting Screw Tightening

Hand-tighten screws to snug, then add half a turn; avoid power drills to prevent damage.

Bag Installation onto Wedge

Slide the pannier bag onto the mounted wedge from above, with notes on potential loop modification.

Latch Securing and Check

Fasten latches by rotating until they engage the keeper; always check security before riding.

Related product manuals