Need help?Do you have a question about the Mosley PRO-67-B and is the answer not in the manual?
Prepare tubing by removing burrs and follow general assembly warnings.
Assemble boom sections and attach the mast plate.
Connect phasing lines between driven elements.
Understand driven element types and their function in tuning.
Detailed settings (Codes I, II, III) and SWR curves for antenna bands.
Step-by-step guide for assembling the front and back driven elements.
Assembly of single trapped, double trapped, and mono-parasitic elements.
Prepare coaxial cable and install an RF choke.
Connect coax, secure hardware, and perform final verification.
Recommendations for optimal antenna placement and performance.
General| Elements | 7 |
|---|---|
| Impedance | 50 ohms |
| VSWR | 1.5:1 |
| Radiation Pattern | Directional |
| Type | Yagi |
| Boom Length | 24 ft |
| Length | 8 feet |
To Next Page