Mosquito Magnet Commander User Manual (English)

Questions and Answers:

S
Sarah BeardJul 27, 2025
Why won't my Mosquito Magnet Insect Control Equipment start?
- C
  Cheryl MerrittJul 27, 2025
  If your Mosquito Magnet Insect Control Equipment won't start, stays not running, and the LCD LED shows a red light flashing every 7 seconds, it might be due to several reasons. First, check if the propane tank is empty by weighing it. If it's newly filled, it may need purging to remove air from the fuel line. Ensure all connections are secure and the propane tank valve is fully open. The fuel line might be blocked, the regulator not fully engaged, or the bug bag could be full or clogged, requiring replacement.
M
Michael PattersonAug 2, 2025
What does it mean when my Mosquito Magnet Insect Control Equipment flashes red and green?
- N
  Natalie LaraAug 2, 2025
  If your Mosquito Magnet Insect Control Equipment shuts down and the LCD LED flashes red/green every 7 seconds, it indicates a high-temperature condition. Turn off the trap, allow it to cool for one hour, and then restart it. If the code continues, contact Customer Care at 1-877-224-1538.
A
antonioodonnellAug 8, 2025
What does a solid red light on my Mosquito Magnet Insect Control Equipment mean?
- Z
  Zachary LarsonAug 8, 2025
  If your Mosquito Magnet Insect Control Equipment shuts down and the LED is solid red, it indicates an electrical fault. Contact Customer Care at 1-877-224-1538.
G
Gerald GuzmanAug 14, 2025
How to improve the catch rate of my Mosquito Magnet Insect Control Equipment?
- M
  Mrs. Susan HarmonAug 14, 2025
  If you're experiencing low or no catch with your Mosquito Magnet Insect Control Equipment, ensure the temperature is consistently above 50°F (10°C), as insects may not be out yet. Review the trap placement guidelines in the owner’s manual. Operate the trap continuously, 24/7, for at least 4 weeks to disrupt mosquito reproductive cycles. Also, check for any restrictions to airflow, which may disrupt the counterflow.