Motic MLC-150C - Changing the Bulb

5.
Ghanging
the Bulb
If the
bulb is used
passed
its specified
lifetime,
it may lead
to damage and should
thus be changed.
To change
the bulb:
pull
out the
power
cable
plug,
make sure
the lamp
housing has cooled
sufficiently,
loosen
the lamp
housing screws
and remove the
lamp housing
from the unit. Next,
push down the steel
wire holding
the bulb
in
place,
and
gently remove the bulb.
Replace with a
bulb of
the same specifications
(21Vl150W),
insert the lamp
housing back
into the main unit and
tighten
the holding screws
(see
diagrams
6 and
7 below).
,rr@
r.
ta
:'"
pÇ
,rrt
|
*
""
lol
,::
i:t
l'i
II
Diagram 6
Diagram 7
il