Motion CM-09 - Page 22

1
1
3 3 3
1
1
3 3 3
1 1
3 3 3
1 1
3
3 3
1 1
3 3 3
+
+
20
19.1 19.2
19.3
20.3 20.4
20.5
20.1
19.4 19.5
19
20.2
MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
To activate
channel select
simultaneously
hold the channel
selection button
and press the pair
button.
Press the pair
button on the (new)
remote to pair the
blinds to the new
channel.
To exit channel
select go back to the
channel selected at
step 19.1 and repeat
step 19.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or other remote.
Select a new channel on
the (new) remote.
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
you would like to
copy.
To activate
channel select
simultaneously hold
the channel selection
button and press the
pair button.
Press program
button on the (new)
remote to pair the
blinds to the (new)
remote.
To exit channel
select choose
the channel you
selected at step 20.1
and repeat step 20.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or to other
remotes. Select a channel
on a (new) remote.
Channel select 5 channel remote
Channel select 15 channel remote
Select the channel
from which the
blinds must be
copied.