Motobecane 40 - R E M O V I N G T H E H a N D L E B a R

REMOV I NG
THE
HANDLEBARS
Slacken the
locknut
under
the twist
grip
and remove
the screw
(8nnn
wrench
and screwdriver,
fi9.
1).
Remove the
twist
grip
sleeve.
Free
the throttle and
decompressor controls
from the
retaining
bracket
on
the
fork
upper
plate
(fig
.
2).
Slacken
the screw
securing the twist
grip
body to
the
handlebars
(fig.
1).
Insert a
screwdriver
blade between the
rubber
grip
and
handlebar
tube
(fig.
3).
Tilt
the
machine slightly
and
inject some oil drops
in
the
space opened
by
the
screwdriver
(fig.
3).
Remove
the
rubber
grip
(fig.
3).
Slacken the
screw
securing the
left hand
grip
body.
Remove the
four nuts
under
the
handlebar
rrurr
clamps.
Remove the
left hand
grip
body.
Remove the
handlebars.
Fig.
1
Fig.2
Fig-
3
R0
63