MOTORGUIDE WIRELESS
90-MM5981 For Questions, Contact Consumer Affairs at #1-920-929-5040 23
© 2005, MotorGuide www.motorguide.com
Freezing Temperature Storage
ot be affected by freezing temperatures.
Store your trolling motor where it will n
Installing or Replacing the Propeller
See the “Accessories” section of this manual to order a replacement
propeller.
M ke sure the motor is disconnected from the battery
before replacing the propeller.
a
D not strike a bent prop pin with a hammer to remove the
. This may
o
pin cause damage to the armature, which is not
o
pli
c vered by warranty. MotorGuide recommends using
ers.
handling the prop, first check for sharp edges or wear protective
peller straight off. If the prop is stuck, grasp one blade with one
with a rubber
1) When
gloves to prevent cuts to the hands.
2) While holding the propeller blade, use a prop wrench to loosen and
remove the propeller nut.
3) Pull the pro
hand and tap lightly on the backside of the opposite blade
CAUTION
CAUTION
Propeller Pin Propeller
Propeller Nut