Need help?Do you have a question about the Motorline 800A and is the answer not in the manual?
Details the components and parts of the sliding gate automation structure.
Provides the physical measurements of the automated system components.
Verifies gate structure, movement, and soil stability before automation installation.
Details fitting nuts into the foundation plate as per provided figures.
Describes positioning the foundation plate correctly for rack and pinion alignment.
Guides on laying cables and mounting the operator unit onto the foundation plate.
Explains how to set the correct distance between the operator and the gate.
Details tightening screws to fix the operator, including removing an exhaust screw.
Describes the procedure to enable manual operation of the gate via a release key.
Covers preparing and mounting the rack onto the gate leaf, ensuring proper meshing and leveling.
Explains how to position and secure limit switch plates on the rack for gate travel control.
General| Motor Type | 230V AC |
|---|---|
| Max Gate Weight | 800 kg |
| Power Supply | 230V AC |
| Max Gate Length | 6 m |
| Maximum Gate Width | 6 m |
| Opening Speed | 12 m/min |
| Closing Speed | 12 m/min |
To Next Page
