Need help?Do you have a question about the Motorline OL2000 and is the answer not in the manual?
Details the components and parts of the automated system, including the gate, motor, and rack.
Provides technical dimensions of the automated system components in millimeters.
Ensures the gate structure, movement, and soil are suitable for automation installation.
Details fitting nuts into the foundation plate holes for secure mounting.
Locates the foundation plate for correct rack and pinion alignment, ensuring horizontal placement.
Guides on laying cables and positioning the operator unit on the foundation plate.
Instructions for setting the correct distance between the operator and the gate.
Details on tightening screws to secure the operator and removing the exhaust screw.
Explains how to use the key to release the operator for manual gate operation.
Step-by-step guide on attaching rack segments to the gate for the motor to engage.
Covers ensuring smooth movement, synchronizing rack teeth, and leveling.
Describes positioning and tightening limit switch plates on the rack for gate travel control.
General| Power Supply | 230V AC |
|---|---|
| Motor Power | 300W |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +60°C |
| Control Type | Radio remote control |
To Next Page
