2 Plug the wall power adapter into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the IMPRES Battery Charging Indicators on page 9.
3 Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved
battery into the charger pocket.
a Align the battery contacts with the charger contacts.
b Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger
indicator illuminates, indicating the charger has recognized the presence of the battery.
4 To remove a radio or Motorola Solutions-approved battery from the charger, pull straight up until
the battery completely clears the charger housing.
1.2
IMPRES Battery Charging Indicators
Table 1: IMPRES Battery Charging Indicators
Status LED Indicator Description
Charger Power On Green for approximately one
second
Successful charger power-up.
Rapid Charging Steady Red Battery in rapid charge mode.
Charged to 90 % or more Blinking Green Battery is charged to 90 % or
greater capacity.
Charged to 95 % or more Steady Green Battery is charged to 95 % or
greater capacity.
Calibration Steady Amber Battery is in recondition or cali-
bration mode.
MN007272A01-AB
Chapter 1 : IMPRES 2 Batteries and Chargers
9
To Next Page
Loading...
