Need help?Do you have a question about the Motorola solutions IMPRES 2 and is the answer not in the manual?
General| Brand | Motorola solutions |
|---|---|
| Model | IMPRES 2 |
| Category | Battery Charger |
| Language | English |
Lists the specific charger models compatible with the system.
Details the APX Series batteries authorized for use with the charger.
Lists authorized APX NEXT Series batteries compatible with the charger.
Describes the components of the adaptive charger system.
Lists authorized power supplies for the charger.
Lists authorized communications modules for the charger.
Outlines the features and advantages of the IMPRES 2 energy solution.
Explains the process to initialize new IMPRES 2 or IMPRES batteries.
Describes battery charging information transfer between pockets.
Explains how the charger automatically assesses and conditions batteries.
Details batteries with automatic calibration and reconditioning features.
Provides instructions on how to update the charger's firmware.
Explains how to manually initiate calibration or reconditioning.
Describes the LED indication for batteries nearing the end of their service life.
Provides instructions for charging batteries with or without attached radios.
Explains how to charge USB accessories using the charger's ports.
Details charging status indications when calibration is not needed.
Shows charging status indications when battery calibration is enabled.
Lists charging status when calibration is initially disabled then enabled.
Details charging status when calibration is required but not enabled.
Shows status for fully charged batteries with calibration pending.
Provides charging indications for other Motorola Solutions batteries.
Details charging indications for batteries not recognized by the charger.
Explains how to prepare IMPRES 2 or IMPRES batteries for long-term storage.
Details preparation steps for IMPRES 2/IMPRES batteries for shipment.
Provides shipment preparation for other Motorola Solutions batteries.
Describes how to access and navigate the main charger setup menu.
Provides step-by-step instructions for configuring charger settings.
Covers options for shipping and storing batteries, including lithium-ion.
Explains settings for long-term battery storage.
Details the sleep mode feature for IMPRES 2 batteries.
Explains how to enable or disable battery calibration/reconditioning.
Describes how to manage the end-of-service life LED indication.
Covers options for display orientation and content.
Explains different formats for displaying battery capacity.
Details the power saver mode settings for the charger.
Defines the time required to press buttons for menu access.
Specifies the supported language for the charger display.
Describes Analyzer Mode functionality in software version V1.0.
Details enhancements to Analyzer Mode in software version V1.05.
Explains Analyzer Mode features in software version V1.11.01.
Covers behavior when batteries are swapped in charger pockets.
Shows how to view battery analyzer data on the display adjacent to the pocket.
Explains how Pocket 1 display shows data from other pockets.
Details viewing IMPRES battery analyzer data on the adjacent display.
Describes how Pocket 1 displays data from other IMPRES pockets.
Shows analyzer data view for other Motorola Solutions batteries.
Explains Pocket 1 display of data from other Motorola Solutions battery pockets.
Details analyzer data view for unknown batteries.
Explains Pocket 1 display of data from unknown battery pockets.
Shows analyzer data view for an empty pocket.
Explains Pocket 1 display of data from an empty pocket.
Provides solutions for normal charging issues with the charger.
Offers solutions for issues related to long-term storage charging.
Provides solutions for problems encountered during ship lithium charging.
To Next Page
