state of readiness as quickly as possible. In these situations, waiting for the battery to discharge may be
inconvenient.
If an IMPRES 2 or IMPRES battery is due for calibration and is already discharged when inserted into the
charger, the charger takes the opportunity to use charge completion as battery calibration.
7.6
End-of-Service Life Indication Menu
Even though the IMPRES 2 or IMPRES battery may be nearing its End of Service, the battery capacity may
be more than adequate for lighter use. As a result, it may be desirable to disable the End of Service Life LED
Indication (Alternating Red / Green).
For APX NEXT XN battery, disabling this indication disables the cumulative over temperature-exposed
battery indication as well.
Figure 8: End-of-Service Life Indication Menu
MN002407A01-AK
Chapter 7: Charger Setup Menu
47
To Next Page
Loading...
