Chapter 8
Analyzer Mode
When and where to use: The charger keypad is located below the Pocket 1 display.
Procedure:
1. To enter Analyzer Mode, press the OK button from more than 3 seconds.
The display shows Press OK to entr ANALYZER MODE.
Figure 14: Menu Display Button for Entry to Analyzer Mode
Item Descriptions
1 OK Button
2. Press OK to display data available from the battery.
8.1
Version V1.0 Analyzer Mode
In software version V1.0, Analyzer Mode is limited to Pocket 1. Analyzer information regarding Pocket 1 and
its contents are presented on the Pocket 1 display.
If no keypad button is pressed for 10 minutes, the charger exits Analyzer Mode and returns to normal
message displays.
MN002407A01-AK
Chapter 8: Analyzer Mode
53
To Next Page
Loading...
