Figure 5: Charger Setup Menu
7.2
Setting Up the Charger Menu
Procedure:
1. Simultaneously press and hold the Left Arrow button and Right Arrow button for more than 3
seconds.
The following message is displayed: Press OK to entr SETUP MENU.
2. Press OK.
3. Press Right Arrow to sequence through the menu selections. Alternatively, press Left Arrow to
sequence through the menu selections in reverse.
4. Press OK to enter the selected menu or select the desired option.
NOTE: The check mark identifies the currently selected option. Introduced in V1.11.01, press
OK to display the next pocket on the Pocket #1 display.
5. Press Back → OK to confirm exit from the selected menu.
NOTE:
● If no Keypad button is pressed for 10 minutes, then the charger exits Charger Setup and
returns to normal message displays.
● Charger Setup selections are stored in nonvolatile memory. Selections are not affected by
cycling charger power.
MN002407A01-AK
Chapter 7: Charger Setup Menu
44
To Next Page
Loading...
