Motorola solutions IMPRES 2 - Swapping Batteries in a Pocket

Figure 17: Version V1.11.01 Analyzer Mode Menu
Analyzer Messages for
Pocket #1 on Pocket #1 Display
Back
Press OK to entr
ANALYZER MODE
Press OK to exit
ANALYZER MODE
Analyzer Messages for
Pocket #2 on Pocket #1 Display
Analyzer Messages for
Pocket #nn on Pocket #1 Display
8.4
Swapping Batteries in a Pocket
If a battery is removed and then the same or a different battery is inserted into the same pocket, the
parameter displayed for the second battery is the same parameter that was being displayed for the first
battery.
For example, Battery IMPRES 2 Cycles is being displayed for an IMPRES 2 battery. This battery is
removed from the pocket. A different IMPRES 2 battery is inserted into the same pocket. The first parameter
displayed for the second battery shows Battery IMPRES 2 Cycles.
The second battery may not have the parameter displayed for the first battery. In this case, the identification
message is displayed for the second battery.
MN002407A01-AK
Chapter 8: Analyzer Mode
55