7.8
Capacity Format Menu
Figure 10: Capacity Format Menu
Default in a new Charger is this format
SETUP MENU
Capacty Format
Okay Back
Okay
Okay
Okay
Right Arrow
Right Arrow
Right Arrow
CAPACITY FORMAT
xxxx0mAh yyy%
CAPACITY FORMAT
xxxx0mAh %BAR
CAPACITY FORMAT
yyy% %BAR
CAPACITY FORMAT
%PotencialCap
Default in a new Charger
CAPACITY FORMAT
%Rated Cap
CAPACITY FORMAT
xxxx0mAh yyy%
CAPACITY FORMAT
xxxx0mAh %BAR
CAPACITY FORMAT
yyy% %BAR
CAPACITY FORMAT
%PotencialCap
CAPACITY FORMAT
%Rated Cap
Okay
Okay
Right Arrow
Right Arrow
Battery Capacity is displayed in one of several available formats. If the Battery Capacity is displayed as a
percentage, the percentage is referenced to either Potential Capacity (full charge) or Rated Capacity.
Typically, IMPRES radios display Battery Capacity percentage referenced to Potential Capacity.
Battery Capacity display options include the followings:
Table 21: Battery Capacity Display Options
Representation Description
xxx0mAh
Present Charge State of Charge (SoC) in milliamp-
hours.
yyy%
Present Charge relative to the Potential Capacity
or Rated Capacity, in percent. When referenced to
Potential Capacity, the maximum value is 100%.
When referenced to Rated Capacity, the maximum
value may be greater than 100%, especially for a
new battery.
%BAR
The equivalent of yyy % represented in an eight-
segment bar.
MN002407A01-AK
Chapter 7: Charger Setup Menu
49
To Next Page
Loading...
