Chapter 14
Charger State Message
Some IMPRES 2 batteries are equipped with Sleep mode. At the end of Ship Lithium, xx % Long-Term
Storage, or 75 % Long-Term Storage, a Sleep-mode-equipped battery is put to sleep.
The Charge State Message in Analyzer mode allows you to check the State of Charge of sleeping batteries.
Table 22: Ship Lithium Enabled and the Battery Completed Ship Lithium Charge
Display Adjacent to Pocket Pocket 1 Displaying Another Pocket
SHIP LI SLEEP
xxx% Rated Cap
xx SHIP LI SLEEP
xxx% Rated Cap
Table 23: xx % Long-Term Storage Enabled and the Battery Completed xx % Long-Term Storage
Charge
Display Adjacent to Pocket Pocket 1 Displaying Another Pocket
STORAGE SLEEP
xxx% Rated Cap
xx STORAGE SLEEP
xxx% Rated Cap
For example, the Charger State Message is not displayed if xx % Long-Term Storage is enabled and the
battery completed 75 % Long-Term Storage charge in a different charger.
MN002407A01-AK
Chapter 14: Charger State Message
66
To Next Page
Loading...
