AP-5131 Access Point: Installation Guide
26
1. Select System Configuration -> Quick Setup from the AP-5131 menu tree.
2. Enter a System Name for the AP-5131. The System Name is useful if multiple devices are
being administered.
3. Select the Country for the AP-5131’s country of operation from the drop-down menu.
The AP-5131 prompts the user for the correct country code on the first login. A warning
message also displays stating that an incorrect country setting may result in illegal radio
operation. Selecting the correct country is central to legally operating the AP-5131. Each
country has its own regulatory restrictions concerning electromagnetic emissions and the
maximum RF signal strength that can be transmitted. To ensure compliance with national
and local laws, be sure to set the Country accurately.
CLI and MIB users cannot configure
their AP-5131 until a two character country code (for example, United States - us) is set.
4. Optionally enter the IP address of the server used to provide system time to the AP-5131
within the Time Server field.
NOTE The System Name and Country are also configurable within the System
Settings screen. Refer to the AP-51xx Product Reference Guide to
optionally set a system location and admin email address for the AP-5131
or to change other default settings.
72-70931_01.book Page 26 Monday, May 4, 2009 8:10 AM
To Next Page
Loading...
