Motorola APX 6000 User Manual

to let the receiver know that the message is
important.
1 Press the Menu Select button directly below
Optn.
2
or to Mark Important and press the Menu
Select button directly below Sel to indicate the
message is important.
The priority status icon appears beside the normal
message icon on the label bar.
Removing a Priority Status from a Text Message
Ensure there is an outgoing message composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 99 for
more information.
1 Press the Menu Select button directly below
Optn.
2
or to Mark as Normal and press the Menu
Select button directly below Sel to remove the
priority status from the message.
The display shows the normal message icon on the
label bar.
Appending a Request Reply to a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 99 for
more information
1 Press the Menu Select button directly below
Optn.
2
or to Req Reply and press the Menu Select
button directly below Sel to request for a reply.
The request reply icon appears beside the normal
message icon on the label bar.
Removing a Request Reply from a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See Composing
and Sending a New Text Message on page 99 for
more information.
1 Press the Menu Select button directly below
Optn.
2
or to No Req Reply and press the Menu
Select button directly below Sel to remove the
priority status from the message.
Advanced Features
102
English

Motorola APX 6000 Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
IP Rating	IP67
P25 Phase 1 & 2	Yes
GPS	Yes
Encryption	AES, DES
Power Output	1-3 Watts (700/800 MHz)
Operating Temperature	-30°C to +60°C
Intrinsically Safe	Yes
Bluetooth	Yes (Bluetooth 4.0)