Motorola APX 6000 User Manual

•
Press , the PTT button, or the
preprogrammed GPS button to return to the
Home screen.
Editing the Coordinates of a Waypoint
Note: Only the preprogrammed coordinates of Home
and Destination can be edited by the user.
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
Optn.
2
or to Waypoints and press the Menu Select
button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
•
or to [Home] and press the Menu Select
button directly below Optn.
•
or to [Destination] and press the
Menu Select button directly below Optn.
4
or to Edit location and press the Menu
Select button directly below Sel.
The first number blinks.
5 Utilize the following control buttons to select the
number/coordinates if required, then press the
Menu Select button directly below Edit to change
the number/coordinates.
•
Press to move to the previous number/
coordinates.
•
Press
to move back to the next number/
coordinates.
A blinking cursor appears in the Edit Location
screen.
6 Utilize the following control buttons or menu to
change the number/coordinates if required then
press the Menu Select button directly below Ok
once.
•
Press to move one space to the left.
•
Press to move one space to the right.
• Press the Menu Select button directly below
Del to delete any unwanted characters.
• Press the Menu Select button directly below
Cncl to return to the previous screen
Advanced Features
129
English

Motorola APX 6000 Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
IP Rating	IP67
P25 Phase 1 & 2	Yes
GPS	Yes
Encryption	AES, DES
Power Output	1-3 Watts (700/800 MHz)
Operating Temperature	-30°C to +60°C
Intrinsically Safe	Yes
Bluetooth	Yes (Bluetooth 4.0)