Motorola APX 6000 User Manual

Re-Pair
Timer
Options
Re-Pair Timer Scenarios
and the user must re-pair the
devices.
• When the device loses Bluetooth
connection, the device will
attempt to re-establish Bluetooth
Connection within the Drop
Timer value.
Infinite (For all
Bluetooth
devices)
• When the radio is powered off,
the accessory attempts to re-
establish the Bluetooth
Connection for a period of time
depending upon the Drop Timer
value. If the device fails to
reconnect within the period, the
accessory then powers off.
Bluetooth Drop Timer
The Bluetooth Drop Timer has two different settings
and functions, depending upon the selection of the
Re-Pair Timer.
Re-Pair Timer
Options
Description
Immediate
(For MCW
Accessories
only)
0 – 15 minutes programmable
buffer time to re-establish the
Bluetooth Connection when the
Bluetooth signal is out of range.
If either device powers off, the
pairing keys are immediately
cleared from both devices and the
devices must re-pair.
Infinite (For all
Bluetooth
devices)
This Timer only applies to the
accessory. The programmable
timer choices are: 0 – 15 minutes, 2
hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW)
headset and PTT which are
preprogrammed to 8 hours.
This is a "stay alive" time that the
accessory will remain on without
the device reconnecting before
powering off. The radio will remain
on until the user powers the radio
Advanced Features
139
English

Motorola APX 6000 Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
IP Rating	IP67
P25 Phase 1 & 2	Yes
GPS	Yes
Encryption	AES, DES
Power Output	1-3 Watts (700/800 MHz)
Operating Temperature	-30°C to +60°C
Intrinsically Safe	Yes
Bluetooth	Yes (Bluetooth 4.0)