28
Selecting a Zone
GENERAL RADIO OPERATION
A zone is a group of talkgroups.
Procedure:
[Zone (3-Position A/B/C)]
1. Move the preprogrammed Zone (3-Position A/B/C)
switch to the position of the required zone.
OR
[Menu]
1. or to Zone.
2. Press the Menu Select button directly below Zone.
3. or to the required zone.
4. Press the Menu Select button directly below Sel to
confirm the displayed zone.
5. Press the PTT button to transmit on the displayed zone
channel.
To Next Page
Loading...
