64
Trunking System Controls
Out-of-Range Radio
ADVANCED FEATURES
When your radio goes out of the range of the system, it can
no longer lock onto a control channel.
Procedure:
1. You hear a low-pitched tone.
AND/OR
The display shows the currently selected zone/channel
combination and Out of range.
Your radio remains in this out-of-range condition until:
It locks onto a control channel.
OR
It locks onto a failsoft channel.
OR
It is turned off.
Top (Orange)
button *
The 16-Position
Talkgroup Select
On/Off/Volume
Control Knob
To Next Page
Loading...
