Motorola APX 7500 O5 - Preparing Your Radio for Use; Turning on the Radio

To Next Page

To Previous Page

APX

7500 O5

Index

Preparing Your Radio for Use

 Turning on the Radio

Press the Power On/Off Button briefly to power on the

radio.

After a short time, the red, yellow and green LEDs light

up. The display then shows Zone and channel text, and

menu items display on the screen.

The backlight will turn on to the last selected dim level.

Note: Pressing the Power On/Off Button before the

LED lights up will be ignored.

If FAIL ##/## appears in the display, the radio will not

function until the condition has been corrected.

If ERROR ##/## appears, some non-critical data has

been changed.

If CH MISMATCH appears, means that either the

Control Head has been connected to an incompatible

transceiver, or vice versa.

If your radio does not power up, contact your dealer.

To turn off the radio, press the Power On/Off Button

after the LEDs light up.

Power On/Off Button

Emergency Button

Other manuals for Motorola APX 7500 O5